Skip to content
Auburn UniversityAU Mesh

Installation

Power on your node with the antenna attached, then connect via Bluetooth or USB.

Install the Meshtastic App

Section titled “Install the Meshtastic App”

Web installation

Section titled “Web installation”

Go to Meshtastic Web Flasher, choose your device, then enable device firmware update (DFU) mode, depending on model, then flash the firmware!

ESP32 DFU / USB Flashing

Section titled “ESP32 DFU / USB Flashing”
  1. Hold the BOOT button (GPIO0)
  2. Press and release EN/RST
  3. Release BOOT

nRF52840 USB DFU

Section titled “nRF52840 USB DFU”
  1. Double-tap the reset button quickly
  2. A USB mass storage drive appears (e.g., NRF52BOOT)
  3. Drag and drop your .uf2 file onto the drive — done

CLI Flashing

Section titled “CLI Flashing”

ESP32 Device

Section titled “ESP32 Device”

Meshtastic Docs

nRF52, RP2040, RP3250

Section titled “nRF52, RP2040, RP3250”

Meshtastic Docs